/**
 * @file       BlynkSimpleWioTerminal.h
 * @author     Anson He (Seeed Studio)
 * @license    This project is released under the MIT License (MIT)
 * @copyright  Copyright (c) 2020 Anson He
 * @date       Nov 2020
 * @brief
 *
 */

#ifndef BlynkSimpleWioTerminal_h
#define BlynkSimpleWioTerminal_h

#ifndef SEEED_WIO_TERMINAL
#error This code is intended to run on the Wio Terminal platform! Please check your Tools->Board setting.
#endif

#define BLYNK_SEND_ATOMIC

#include <BlynkApiArduino.h>
#include <Blynk/BlynkProtocol.h>
#include <Adapters/BlynkArduinoClient.h>
#include <rpcWiFi.h>


class BlynkWifi
    : public BlynkProtocol<BlynkArduinoClient>
{
    typedef BlynkProtocol<BlynkArduinoClient> Base;
public:
    BlynkWifi(BlynkArduinoClient& transp)
        : Base(transp)
    {}

    void connectWiFi(const char* ssid, const char* pass)
    {
        BLYNK_LOG2(BLYNK_F("Connecting to "), ssid);
        WiFi.mode(WIFI_STA);
        if (pass && strlen(pass)) {
            WiFi.begin(ssid, pass);
        } else {
            WiFi.begin(ssid);
        }
        while (WiFi.status() != WL_CONNECTED) {
            BlynkDelay(500);
        }
        BLYNK_LOG1(BLYNK_F("Connected to WiFi"));

        IPAddress myip = WiFi.localIP();
        BLYNK_LOG_IP("IP: ", myip);
    }

    void config(const char* auth,
                const char* domain = BLYNK_DEFAULT_DOMAIN,
                uint16_t    port   = BLYNK_DEFAULT_PORT)
    {
        Base::begin(auth);
        this->conn.begin(domain, port);
    }

    void config(const char* auth,
                IPAddress   ip,
                uint16_t    port = BLYNK_DEFAULT_PORT)
    {
        Base::begin(auth);
        this->conn.begin(ip, port);
    }

    void begin(const char* auth,
               const char* ssid,
               const char* pass,
               const char* domain = BLYNK_DEFAULT_DOMAIN,
               uint16_t    port   = BLYNK_DEFAULT_PORT)
    {
        connectWiFi(ssid, pass);
        config(auth, domain, port);
        while(this->connect() != true) {}
    }

    void begin(const char* auth,
               const char* ssid,
               const char* pass,
               IPAddress   ip,
               uint16_t    port   = BLYNK_DEFAULT_PORT)
    {
        connectWiFi(ssid, pass);
        config(auth, ip, port);
        while(this->connect() != true) {}
    }

};

#if !defined(NO_GLOBAL_INSTANCES) && !defined(NO_GLOBAL_BLYNK)
  static WiFiClient _blynkWifiClient;
  static BlynkArduinoClient _blynkTransport(_blynkWifiClient);
  BlynkWifi Blynk(_blynkTransport);
#else
  extern BlynkWifi Blynk;
#endif

#include <BlynkWidgets.h>

#endif